catalog | saw | Калибр ПЛЭ-250/1500

diamond saw Калибр ПЛЭ-250/1500

Калибр ПЛЭ-250/1500 Photo

Characteristics:

saw type	diamond saw
manufacturer	Калибр
design	table saw
number of speeds	1.00
tilt angle (degrees)	45.00
cutting height (mm)	65.00
rotational speed (rev/min)	3000.00

Sizes:

abutment surface, depth (mm)	638.00
abutment surface, width (mm)	638.00
disk diameter (mm)	250.00
bore diameter disc (mm)	25.00

Efficiency and power consumption:

engine power (W)	1500.00
motor power (hp)	500.00

You can buy diamond saw in online stores

catalog: saw

saw Калибр

Please help the project! Please share it! Thank you!

LINK:
BB CODE:
HTML CODE:

Please help the project: Thank you!

Characteristics saw Калибр ПЛЭ-250/1500. Design table saw. Motor power 500.00 hp. Manufacturer Калибр. Number of speeds 1.00. Disk diameter 250.00 mm. Engine power 1500.00 W. Abutment surface, width 638.00 - abutment surface, depth 638.00 mm. Tilt angle 45.00 degrees. Rotational speed 3000.00 rev/min. Diamond saw. Bore diameter disc 25.00 mm. Cutting height 65.00 mm.

Калибр ПЛЭ-250/1500	Калибр ПЛЭ-180	Калибр ПЛЭ-250/1850	Калибр ПЛЭC-250/1900
Калибр ПЛЭC-250/1700	Калибр ПЛЭ-200/1000	Калибр ПЛЭС-200/850	Калибр ПЛЭ-150
Калибр ЭПА -200/115	Калибр ПЛЭ-200/800	Калибр ПЛЭ-200/900	Калибр ПЛЭ-250/1500А
Калибр ПЛЭС-250/1600	Калибр ПЛЭС-200/1300