catalog | saw | Калибр ПЛЭ-250/1500А

diamond saw Калибр ПЛЭ-250/1500А

Калибр ПЛЭ-250/1500А Photo

Characteristics:

saw type	diamond saw
manufacturer	Калибр
design	table saw
number of speeds	1.00
tilt angle (degrees)	45.00
cutting height (mm)	65.00
rotational speed (rev/min)	3000.00

Sizes:

abutment surface, depth (mm)	638.00
abutment surface, width (mm)	638.00
disk diameter (mm)	250.00
bore diameter disc (mm)	25.00

Efficiency and power consumption:

engine power (W)	1500.00
motor power (hp)	500.00

You can buy diamond saw in online stores

catalog: saw

saw Калибр

Please help the project! Please share it! Thank you!

LINK:
BB CODE:
HTML CODE:

Please help the project: Thank you!

Characteristics saw Калибр ПЛЭ-250/1500А. Manufacturer Калибр. Motor power 500.00 hp. Abutment surface, width 638.00 - abutment surface, depth 638.00 mm. Cutting height 65.00 mm. Disk diameter 250.00 mm. Tilt angle 45.00 degrees. Engine power 1500.00 W. Diamond saw. Number of speeds 1.00. Design table saw. Bore diameter disc 25.00 mm. Rotational speed 3000.00 rev/min.

Калибр ПЛЭ-250/1500	Калибр ПЛЭС-200/1300	Калибр ПЛЭC-250/1700	Калибр ПЛЭ-250/1500А
Калибр ПЛЭC-250/1900	Калибр ПЛЭ-200/800	Калибр ПЛЭ-180	Калибр ПЛЭ-200/1000
Калибр ПЛЭС-200/850	Калибр ПЛЭ-150	Калибр ПЛЭС-250/1600	Калибр ЭПА -200/115
Калибр ПЛЭ-250/1850	Калибр ПЛЭ-200/900